./

 

 

 

Significant cost savings with a combined separator for EGR and Bilge


Marinfloc CD EGR Separator

25.03.2020 13:52:39 - Varekil, Sweden, 2020-03-25: Marinfloc today announced their combined Exhaust Gas Recirculation Bleed Off water treatment system and Bilge water separator. Their innovative solution is approved by both DNV GL and MAN Energy Solutions and fulfils the requirements of MEPC 107(49) and MEPC 307(73).

(live-PR.com) - Varekil, Sweden, 2020-03-25: Marinfloc today announced their combined Exhaust Gas Recirculation Bleed Off water treatment system and Bilge water separator. Their innovative solution is approved by both DNV GL and MAN Energy Solutions and fulfils the requirements of MEPC 107(49) and MEPC 307(73). The approval means that only one separator is required instead of two. Reducing the amount of equipment

 

needed on a vessel will provide shipyards, engine makers and ship owners with a significant cost saving solution.


Reduce both CAPEX and OPEX
Exhaust Gas Recirculation (EGR) is used to reduce NOx as per the Tier III requirements when use with compliant fuel. The EGR process will generate a portion of bleed off water that must be treated to < 15 PPM which is also the requirement for bilge water. By combining the two treatment systems, the Capital Expenditures will be significantly reduced without any negative impact on performance. Additionally, there will also be a welcomed reduction in Operating Expenditures as maintenance, spare parts and training are needed only for one unit.

The system is based on Marinfloc’s well-known flocculation technology with thousands of references worldwide. The Whitebox® is included as standard to segregate the waste streams, to eliminate cross contamination and record all activities. Moreover, the Whitebox® fulfils the EXXON requirements and is Marinfloc’s recommendation on all US calling vessels.


“Both treatment units are mandatory, so why not combine them. It would be foolish to have a separate treatment unit that might not even be in use for the majority of the year. This way neither crew nor owners will lose any sleep going into NECAs as they are already operating the unit on a daily basis” says Martin Gombrii MD at Marinfloc S&P


The development of this solution started back in 2016 at MAN Energy Solutions facilities in Copenhagen and concluded when DNV GL approved the system design in early 2020.

“Sometimes new products are done overnight, sometimes they take five years. Looking at the result I’m glad that we didn’t rush anything. We have developed a truly unique product and are proud to be a MAN Energy Solutions approved supplier” says Mr. Benny Carlson, Chairman of Marinfloc.


To learn more visit www.marinfloc.com/EGR
ENDS

For further information

Mr. Fredrik Andersson
Area Sales Manager
Phone: +46 304 606 373
Mail: fredrik.andersson@marinfloc.com

Mr. Kristofer Ericsson
Marketing Manager
Phone: +46 304 606 300
Mail: kristofer@marinfloc.com



About Marinfloc
Since the start of Marinfloc, we are the leader in innovative systems for treatment of wastewater on ships and offshore units. Our treatment equipment includes bilge water, EGR bleed off water, drill slop, black and grey water and oily sludge. The success of Marinfloc is founded in our knowledge and long experience in marine engineering. We take pride in the fact that all Marinfloc technology is thoroughly developed on board ships and offshore installations to meet onboard conditions and not just to fulfil regulations that do not mirror reality. To clean water we use the flocculation technology as it is proven to be by far the most effective method. The effluent water quality from all our treatment units supersedes all current regulations.
All our equipment is fabricated at our factory in Varekil, Sweden to meet the highest quality standards using only top-quality components and materials. Our dedicated service organization consists of skilled service engineers ready to offer quick responses to assist our customers as required.

Please visit us at: www.marinfloc.com


Contact information:
Marinfloc AB

Industrivägen 10, 472 95 Varekil, Sweden

Contact Person:
Fredrik Andersson
Area Sales Manager
Phone: +46 304606373
eMail: eMail

Web: http://www.marinfloc.com

Author:
Roland Persson
e-mail
Web: http://www.orn.nu
Phone: +46 411 18400


 

Disclaimer: If you have any questions regarding information in this article please contact the author. Please do not contact Live-PR.com. We are not able to assist you. Live-PR.com disclaims content contained in this article. Live-PR.com is not authorized to give any information about content and not responsible for content posted by third party.