Industries

 

New generation of extruder degassing systems at K 2019


The new generation of Plastex vacuum systems for extruder degassing is ready for Industry 4.0

16.10.2019 10:51:25 -

(live-PR.com) - Busch Vacuum Solutions present the latest generation of Plastex vacuum systems for extruder degassing for the first time at K 2019.

The new Plastex vacuum systems can be programmed and monitored via a display. They are fully connected in order to exchange data with the extruder control system and can be operated directly via the extruder. The fact that all components

 

are connected means that Plastex vacuum systems are ready for Industry 4.0. The degassing system is controlled as required by a frequency-controlled drive motor. This means that the programmed vacuum level is precisely maintained – the energy saved in the process is a further benefit.

In recent years, Plastex vacuum systems have become widely established for degassing the melt in the screw zone of extruders. The model presented at K 2019 is equipped with a Mink claw vacuum pump. These vacuum pumps operate dry, i.e. they do not require any operating fluids such as water, which can lead to high costs for treatment and disposal.

With the new generation of Plastex vacuum systems, Busch now impresses with further benefits. Thanks to the demand-dependent control and the option to adjust the vacuum level precisely to the material to be extruded, the extruder and the temperature conditions, it is possible to reproduce product quality without having to readjust the vacuum level manually via valves during the process. Plastex vacuum systems are available in different configurations and sizes. They are suitable for both compounds and master batches. They can be used to degas polyolefins such as PP/PE, EVA, PBT, ABS, EVOH or POM. Even the degassing of recycled material does not pose a problem for Busch's new Plastex vacuum systems. A flushing device allows to clean the vacuum pump after or during the process. It is also possible to program the cleaning intervals and the dosing of the cleaning agent.

The new Plastex vacuum systems' control system also permanently monitors the condition of the filters and separators and immediately informs the operator via the display or extruder control system if, for example, a filter needs to be cleaned or condensate needs to be drained from the after-separator or the condensate collection container. The operator therefore always has an overview of all operating parameters. Any necessary action steps are immediately displayed to the operator. This increases reliability, simplifies operation and minimizes maintenance costs.

Busch's Mink claw vacuum pumps have not only established themselves in the degassing of the melt during extrusion; this vacuum technology has also become the state of the art for pneumatic material feeding. Busch will present the latest development in Mink claw vacuum pumps at the trade show booth: the Mink MV 0600 B is equipped with a frequency-controlled drive motor as standard and can therefore adapt the pumping speed to the actual requirements. This means that not only can the material be transported as gently as possible, but further energy and cost savings are also possible.

Busch Vacuum Pumps and Systems is one of the world’s largest producers of vacuum pumps, vacuum systems, blowers and compressors.
Its extensive product portfolio comprises solutions for vacuum and overpressure applications in all industries, including the chemical, semiconductor, medical technology, plastics, and food sectors. It also covers the design and construction of customized vacuum systems, as well as a global service network.
The Busch group is a family-owned company and is still managed by the Busch family. Busch Vacuum Pumps and Systems has 3,000 employees in more than 60 companies in over 40 countries worldwide. Busch is headquartered in Maulburg, in southwest Germany. This is the location of Busch SE headquarters, as well as the German production facility and German sales company. In addition to Maulburg, Busch also has its own production plants in Switzerland, the UK, Czech Republic, Korea and the USA.


Contact information:
Busch Vacuum Pumps and Systems

Schauinslandstrasse 1
79689 Maulburg

Contact Person:
Jasmin Markanic
Coordinator Global Press & Media Relations
Phone: 076226813376
eMail: eMail

Web: http://https://www.buschvacuum.com

Author:
Jasmin Markanic
e-mail
Web: http://www.buschvacuum.com
Phone: 076226813376


 

Disclaimer: If you have any questions regarding information in this article please contact the author. Please do not contact Live-PR.com. We are not able to assist you. Live-PR.com disclaims content contained in this article. Live-PR.com is not authorized to give any information about content and not responsible for content posted by third party.
refer this article
Print This Article
Terms Of Use Privacy About Live-PR.com Contact Us