Advertising & Marketing


New distance couplings from ENEMAC

New distance couplings from ENEMAC

13.07.2017 12:14:30 - Simple connection of far apart shafts with new distance couplings from GERMANY

( - ENEMAC, the drive specialist from Kleinwallstadt in GERMANY, offers three new types of distance couplings.

The new types EWLA and EWLM are partycularly able to compensate large axial and radial offsets. Since these are metal bellows couplings, connected by a high-strength aluminum tube, the advantages of the metal bellows are, of course, obtained. The two types are backlash-free and suitable for


high operating speeds with a low moment of inertia. For high temperature applications of up to 300 °C, the EWLM type is most suitable. Lengths of up to 6 m can be bridged with a length-variable intermediate tube. This pipe is adjusted accordingly to the customer's specifications.

For compensation of large lateral misalignments, the new EWLH product series is available, which consists of two elastomer couplings connected through an high-strength aluminum tube. The plug-in coupling is axially shiftable, which makes installation much easier. Due to the integrated elastomer spiders, existing vibrations are being dampened.

The mounting-friendly clamping hubs, which are part of each new coupling, ensure a non-positive connection.

ENEMAC distance couplings can be used in a torque range of up to 1600 Nm for shafts with a diameter of up to 100 mm, for speeds up to 8000 rpm. Additional intermediate bearings are not required, which spares time and costs to the customer.

Get to know more about the technical characteristics of our new couplings on the ENEMAC website:

See EWLA (metal bellows coupling):

See EWLM (metal bellows coupling):

See EWLH (elastomer coupling):

Founded in 1981 in Kleinwallstadt am Main, the ENEMAC GmbH (Society for Energy and Mechanical Engineering) looks back on more than 30-year history. Steady progress and recent developments have extended and modified the product range of ENEMAC over the decades.
In the early years focusing on the topic of machine safety for feed drives. With the safety clutch type ECT-R ENEMAC entered the market in the machine tool industry. Further series followed to service the needs of this market segment.

During the 1990s, the focus shifted towards food and packaging industry. ENEMAC specialized on rust-free safety couplings made of stainless steel to accomodate the high hygiene and production requirements in this area. In parallel, lower cost versions of safety couplings, the so-called overload clutches have been developed. To complete the product range shaft couplings in different variants and versions have been integrated into the offer.

In recent years, the company ventured a step above the usual "clutch plate" addition in the direction of clamping technology. Mechanical clamping screws and clamping nuts and and hydromechanical spring clamping cylinders provide an alternative to simple workholding equipment such as clamps or clamping claws as well as to semi or fully automatic clamping devices.

ENEMAC clamping technology is very versatile. Whether for tool or workpiece clamping, in materials handling, bending and welding engineering - either as original equipment or aftermarket item.

What value this new product line in the company's development will take, the future will tell. The company will face the new challenges of the market and be constantly striving to meet customer needs individually and in highest quality.

Press Information:
Enemac GmbH

Daimler Ring 42, 63839 Kleinwallstadt, GERMANY

Contact Person:
Mr. Domzalski
Phone: 0049/6022/7107-0
eMail: eMail



Disclaimer: If you have any questions regarding information in this article please contact the author. Please do not contact We are not able to assist you. disclaims content contained in this article. is not authorized to give any information about content and not responsible for content posted by third party.
refer this article
Print This Article
Terms Of Use Privacy About Contact Us